1000W 2000W Solar Panels Battery on Grid Tie Inverter Limiter for Home PV Power System DC 22-65V/45-90V AC 90V-130V 190V-260V

Solar Power Grid Tie Inverter

–with Limiter / Sensor   Battery Discharge Power Mode

–DC 22V-60V or 45V-90V (optional )

–AC 100V 110V 120V 220V 230V 240V  ( auto work )

Why we produced the GRID TIE INVERTER WITH LIMITER ?

It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are  reduced to insignificant levels, if not eliminated — because in some countries,the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if  power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem

This is the 2nd generation grid tie inverter with limiter.

With the 2nd generation GTIL,we integrated the limit function inside the GTI-We call this internal limiter.In this way,No additional limiter module is needed,reduced customer’s cost,more easier for installation.But in case customer install inverter far away from the main circuit breaker,we also enable the 2nd GTIL work with stand-alone limiter,we call this-external limiter.For sure,the inverter can work under normal Grid tie-no limit mode,just set on the nice LCD and save your setting.

New upgraded firmware enable battery or solar limiter current and power model.

Description:

a: DC input , for solar panels connection

b:  Connector for external limiter

c: Connector for internal limiter

d: AC output , use AC cable to connect to home grid

Sensor Clamp (ONLY FOR MODEL WITH LIMITER FUNCTION):

How to choose the inverter  :

1. About input voltage :

The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V .

Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel ).

the 45-90V model inverter will start up at 49.5V, after starting, the inverter can work in 45V-90V.

Vmp 50v-90v Solar panels in parallel suggested ; for Vmp 25V-45v solar panels , we suggest 2 panels in series , the total voltage will be 50V-90V , then connect 2 or more groups in parallel .  for example : 2 pcs 200-260w (Vmp 31v ) connected in series , 2 groups in parallel .  Save 2 connectors .

How to use the grid tie inverter ?

1 unit inverter installation / more units inverters in parallel . the inverter AC output can be connected in the AC plug of grid in the house .

2-1. Using Grid Tie Inverter With Limiter Model

2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid.

3. Installation of GTIL With Internal Limiter

3.1 This installation is not require an additional limiter module,Installation is much easier.Clamp the current sensor cable to the hot wire to measure the current,the internal limiter will auto detect the load power and control the inverter output power,excess power will be well controlled.

4.Limiter Setting on the LCD of the inverter:

5 Battery Discharge Power Mode

New upgraded firmware enable battery or solar limiter current and power model.

6 Limiter Module Specification