The Multiplus II is a combination of the Multiplus charger converter and the Multigrid.

In one and the same box you have at your disposal a converter with a power of 5 kVA, a battery charger delivering up to 70 A as well as an automatic transfer switch allowing an uninterrupted power supply of the most sensitive devices. The Multiplus II is perfectly adapted to meet your power needs whatever the situation of your installation. In addition, this new generation converter has even lower self-consumption to guarantee optimal management of your energy.

Victron product reference: PMP482505010

MULTIPLUS II CONVERTER
Maximum converter power: 4000W at 25°C and 3700W at 40°C
Peak power of the converter for a few seconds: 9000 W

MULTIPLUS II CHARGER
Input voltage range: 187 to 265 V
Power frequency range: 45 to 65 Hz
Charging voltage delivered for absorption mode: 57.6 V
Charging voltage delivered for float mode: 55.2 V
Maximum charging current at 25°C: 70 A
Settings and architectures for the ESS Victron Energy system at the link opposite.

INCREASE POWER THROUGH PARALLEL AND THREE-PHASE OPERATION
Up to 6 Multis can be operated in parallel for more power output. For example, six 48/5000/70 units will provide 25 kW / 30 kVA output power and 420 Amps of load capacity.
In addition to parallel connection, three units of the same model can be configured for three-phase output. But that’s not all: up to 6 series of 3 units can be connected in parallel for a 75 kW / 90 kVA converter and more than 1200 A load capacity.

To put 2 Multiplus II units, it must of course be mentioned as possible in the product manual. Then, the units must be of the same “series”. To verify this, we take the first 4 digits after “HQ” from the serial numbers, if they are the same, we can be sure that the units can be connected in parallel. If this is not the case, there may be exceptions please contact us indicating the serial number of each of your units.

MULTIPLUS II DIMENSIONS
Connection to batteries: two M6 bolts
AC 230V input connection: Screw terminal block up to 13 mm²
Weight: 29kg
Dimensions (H x W x D): 56 x 32 x 14.1 cm
Victron product reference: PMP482505010